All Thread Rods
Ferry Cap Screws
Flat Steel Washers
Hex Cap Screws
Hex Tap Bolts
Socket Screw Products
For Phone Quote Inside 714, call (714) 375-1963
For Phone Quote Outside 714, call (888) 565-1963
For FAX Quote, call (714) 596-1090
For Email Quote click here.
Best Nuts 'n Bolts
We Solve Your Problems!
California Distributors of Wholesale and Retail
Metal Industrial Fasteners at Incredible
Standard Extended --- Chisel Point - Hammerlock - Self-Locking - Taper Point
with Square Cut Ends
from 1/32x1/4 -- Clinch Pins - Humped Cotter Pins - Hitch Pin (Hair Pin) Clips
Many sizes in stock
Materials: steel, brass, stainless, plated steel, monel & others
Other Items: price and delivery on request.
Call us for specials.
Not all styles are available in all materials.
Alloy steel and stainless steel
1/16x1/4 to 1x6 in alloy
Pull dowels and other materials available
Manufactured to ANSI Standard B 18.8.2 1978
We can quote on specials to your specs. Call us.
Rolled, Slotted, Split, Tension
1/16 diameter to 1/2 diameter
Carbon steel plain & plated
Type 302 stainless (non-mag)
Type 420 stainless
Also metric sizes
Designed to replace cotter pins, dowel pins, taper pins, set screws, clevis pins, bolts, nuts,
and other fasteners.
Positive holding action with six standard solid pin types and many specials.
Sizes: 1/16" through 1/2" diameter
1/4" through 4-1/2" long
High alloy, heat treated pins for extra shear, shock and fatigue resistance
Materials: Cold drawn low carbon steel is standard. Other materials available.
Finishes: Zinc electroplating is standard. Other finishes available.
Commercial -- Tapered Threaded
Size 8/0 to 14 ------- Size 0 to 14
Taper 1/4" per foot
Check with us for prices and availability.
Where disassembly of parts is expected, the taper pin, which can be easily driven out of its sized hole,
is a useful fastening element. The cylindrical pin is made with a taper of 1/4" per foot
measured on the diameter and with rounded or beveled ends to facilitate driving in reamed holes.
ALL SIZES, BRASS & STEEL
Minimum order quanitites required -- check with us.
Commonly used for attaching nameplates and other light-duty fastening jobs, this pin has a
semispherical head at one end and a long cone or pinch point at the other. It is usually
hammered into place by hand.
ADJUSTABLE CLEVIS PIN
COTTER PIN HOLES ARE DRILLED IN ALL PINS
Commercial & Aircraft
Standard & Special
Clevis pins are available from the smallest (1/8" dia.) to as large as hot forgings with permit. Carbon
steel is usually "off the shelf" up to 1" diameter.
This headed, unthreaded pin is inserted into a prepared hole and locked in place with a cotter pin
at the chamfered shank end. Disassembly is possible. Used extensively in both the aircraft and
Quoted to your specifications and prints.
Note: Spring, Grooved, Taper, Escuthceon, Clevis and Special Pins
These items are supplied from our source factories. They will probably require
more lead time than items supplied from our stock. We will always inform you what the delivery time is
before you place your order. Call us. Or click here for email quote.